HOW TO COMPETITIVELY TENDER, BUT STILL GET THE KITCHEN YOU NEED: STEP BY STEP GUIDE
March 16, 2020 by wpjX9tncTJIl
If you’re in the process of sourcing funding for a new kitchen, you’ll know that it’s not as simple as it seems.
Making your kitchen proposal look like an attractive prospect at a reasonable price can be tough – but cut corners on quality and you could be in for a disappointment.
Step 1: Get to know your kitchen specification Not all kitchens are created equal. While you’re in the preliminary stages of planning your kitchen with the rest of the committee, get to grips with what different kitchen providers have to offer.
1. MDF/timber built frame Available from the likes of Howdens, B&Q and Homebase, these kitchens look great at home – and their price looks great on paper. But MDF is a porous substance, and while it might be holding up ok at your house, it can’t withstand the heavy use a church kitchen goes through over the course of a year. MDF kitchens will quickly need replacing, and rarely conform to health and safety code after a couple of years of heavy use.
2. Semi-commercial steel cabinets + stainless steel worktops A steel carcass system with a cosy domestic aesthetic, this is usually the best option for a church kitchen. Unlike an MDF build, it can withstand a lot of wear and tear without becoming a health and safety hazard – or starting to look shabby. Powder-coated steel doors inject personality and colour, making a more natural fit with the church surroundings. Take a look at Steelplan’s semi-commercial kitchens here.
3. Fully-commercial stainless steel catering kitchen An industrial kitchen is great for restaurants and hotels. Anywhere else, a fully-commercial kitchen will look harsh and have an institutional feel. They may be long lasting, but they could be unwelcoming for your volunteers and be off-putting to casual hall hirers. They are also the most expensive option, so avoid being over-sold a full-commercial set up.
Step 2: Choosing a semi-commercial kitchen A semi-commercial kitchen will last longer than an MDF build but look less corporate than a fully-commercial stainless steel kitchen. Although the outset cost is comparatively more than an MDF kitchen, the overall investment will be less: they are easy to maintain, with less repair and maintenance costs and a much longer lifespan.
Step 3: Competitive tendering Once you’ve opted for a Steelplan semi-commercial kitchen, it’s important to get competitive rates for remedial building work to present to your finance committee. When approaching two or three local builders or architects (depending on how extensive your refurbishment project is), ask for installation of a semi-commercial kitchen – Steelplan Kitchens or equivalent specification – to be included in the tender.
Knowing how to make sure the right specification is included can be difficult, but our kitchen experts can help. We’ve included a full specification list at the end of this article – just copy and paste into your tender submitted to contractors – but if you need any further help contact our kitchen design team.
This process should help you to get funding for the semi-commercial kitchen your church needs, as opposed to a kitchen that will be a temporary solution not a long term investment. If you need any further advice from our kitchen design team, call us on 0844 809 9186 or email [email protected] to arrange a free consultation.
In the meantime, take a look at our new video on how a semi-commercial kitchen could work for you.
POWDER COATED STEEL KITCHEN UNITS
Material All cabinets are manufactured entirely in zinc coated steel.
Surface Finish A 3 stage ‘pre-treatment’ & finishing process protects all painted metalwork as follows:
i.) An alkali wash and degrease to clean the steel.
ii.) The metal is now subjected to a pre-treated process called Brugal or “Precoat”. This is a proprietary chemical manufactured in the UK by Walterisation. The process is best described as a cross between Chromating and Phosphating, and in addition a thin film of resin primer is deposited on the metal which is then Stoved in an oven at 100° C.
iii.) Coated with a Spectrum 2 polyester powder paint which has been specially formulated not to let off any toxic fumes in the event of fire (London Underground Approved). The work is then Stoved again at 120° C to produce the lasting, attractive corrosion resistant polyester finish.
Door and drawer fronts also available in brushed stainless steel.
Doors Manufactured in double skinned 0.9mm zinc-coated steel.
Drawers Manufactured in 0.9mm zinc coated steel.
Shelves Manufactured in 1.2mm zinc coated steel.
Components All cabinets constructed using M4 engineering screws.
All legs fully adjustable.
All hinges are metal, fully adjustable self-closing type.
All products manufactured under a quality assurance system in accordance with BS5750 Part 2/ISO 9002.
Plinths available in either aluminium extrusion or Stainless Steel.
STEELTOPS STAINLESS STEEL WORKTOPS
All Steeltops stainless steel worktops based on the following specifications:
A mixture of 1.2mm or 1.5mm gauge steel
304 grade stainless steel
All worktops filled with WBP Ply
Manufactured to bespoke site requirements
Supplied with earth tags
Seamless welded Sink bowls to suit agreed design all recessed in water retained edged detail. Drainers to be fluted and have a fall in to the sink
Folded upstands to all wall abutments to suit design